PA6/PA66 Fiber Filament Yarn Disk Type Shredder

2025/03/13

1. Introduction to PA6 PA66 Fiber

PA6 (polyamide 6) and PA66 (polyamide 66) are two common polyamide fibers with good wear resistance, corrosion resistance, high strength and excellent resilience. They are widely used in textiles, packaging, automobiles, electronics and other fields. In my country, the production and consumption scale of PA6 PA66 fibers has increased year by year, and has become an important part of high-performance fiber materials.
PA6 fiber is polymerized by caprolactam, has good dyeability and softness, and is mainly used in the production of underwear, socks, sportswear and other textiles. PA66 fiber is polymerized by adipic acid and hexamethylenediamine, has higher strength and wear resistance, and is widely used in industrial yarns, tire cords, conveyor belts and other products.

2. Demand for shredding PA6 PA66 fiber filaments

During the production process, PA6 PA66 fiber filaments will produce certain waste, such as films, woven bags, pipes, profiles, yarns, etc. If these wastes are directly discarded, they will not only waste resources, but also pollute the environment. Therefore, shredding PA6 PA66 fiber filaments to achieve waste recycling has high economic value and environmental significance.

3. ACERETECH recommended equipment: DTS600 disc shredder

For the demand for shredding PA6 PA66 fiber filaments, ACERETECH recommends the DTS600 disc shredder to you. The equipment has the following characteristics:
Applicable to a variety of materials: DTS400 disc shredder is suitable for PA6 PA66 waste such as film, woven bags, pipes, profiles, yarn, fiber, filament, etc.
Powerful shredding ability: The equipment adopts the principle of single-axis shredding, with strong shredding force and good shredding effect.
Adjustable particle size: By adjusting the mesh aperture, shredded particles of different sizes can be obtained to meet the needs of different customers.
High efficiency and energy saving: DTS400 disc shredder adopts variable frequency speed regulation to achieve high efficiency and energy saving operation.
Easy to maintain: The equipment has a simple structure, convenient maintenance, and reduces maintenance costs.

4. The parameters of DTS400 are as follows

Model  DTS400
Effective size of crushing bin (mm) 1800*400
Feed port size (mm) 750*600
Number of shafts (n) 1
Shaft speed (r/min) 54
Rotor diameter ¢(mm) 400
Blade specification  Material: Forged wear-resistant rigid
Principal axis Material: 40Cr, heat treatment hardness HB250-280 (tempered)
Stationary knife Material: H13 steel (forging tool) Rockwell hardness 54-57 HRC
Coupling The link between the main engine and the reducer adopts the drum type tooth connection, and the transmitted torque is large
Under frame 200*200*10mm rectangular tube welding parts
Cutting Chamber Material: 16Mn welded shell
Bearing One unidirectional thrust ball bearing, one cone roller bearing, two angular contact ball bearings with lock outer ring, and one aligning roller bearing (NSK brand)
Motor protection class IP55
Power (kw) 55/75
Control system Inverter: Inovance
Reduction gear XINGXING gear reducer (water cooling) with large thrust bearing seat
Capacity (Kg/H) 500~1000 (The output varies according to the material, shape, specific gravity, material properties, etc.)

Click the link below to view the factory test video.